ANSI/API Spec 5L

This Standard specifies requirements for the manufacture of two product specification levels (PSL 1 and PSL 2) of seamless and welded steel pipes for use in pipeline transportation systems in the petroleum and natural gas industries.

This editon of API Spec 5L is the modified national adoption of ISO 3183: 2007 Petroleum and natural gas industries Steel pipe for pipeline transportation systems. This specification contains the API Monogram Annex as part of the U.S. national adoption.



Keywords: ISO 3183

Product Code(s): G05L44,G05L44,G,G,G05L44C,G05L44C

This product replaced by:ANSI/API Spec 5L - Specification for Line Pipe, Forty-fifth Edition
This product references:BS EN 10204:2004 - Metallic materials. Types of inspection documents
API Spec 5B - Specification for Threading, Gauging, and Thread Inspection of Casing, Tubing, and Line Pipe Threads (US Customary Units) (Includes March 2004 Addendum)
API RP 5A3 - API Recommended Practice 5A3, Recommended Practice on Thread Compounds for Casing, Tubing and Line Pipe, Second Edition / ISO 13678:2000 Petroleum and natural gas industries - Evaluation and testing of thread compounds for use with casing, tubing and line pipe
ANSI/API RP 5L3 - Recommended Practice for Conducting Drop-Weight Tear Tests on Line Pipe
ASNT SNT-TC-1A-2006 - Recommended Practice No. SNT-TC-1A - Non-Destructive Testing, 2006 Edition (Includes copy of CP-105-2006)
NACE TM0284-2003 - Standard Test Method - Evaluation of Pipeline and Pressure Vessel Steels for Resistance to Hydrogen-Induced Cracking
NACE TM0177-2005 - Laboratory Testing of Metals for Resistance to Sulfide Stress Cracking and Stress Corrosion Cracking in H2S Environments
ISO 31-0/Amd2:2005 - General principles concerning quantities, units and symbols - Amendment 2
ISO 148-1:2006 - Metallic materials - Charpy pendulum impact test - Part 1: Test method
ISO 377:1997 - Steel and steel products - Location and preparation of samples and test pieces for mechanical testing
ISO 404:1992 - Steel and steel products - General technical delivery requirements
ISO 2566-1:1984 - Steel - Conversion of elongation values - Part 1 : Carbon and low alloy steels
ISO 4885:1996 - Ferrous products - Heat treatments - Vocabulary
ISO 6506-1:2005 - Metallic materials - Brinell hardness test - Part 1: Test method
ISO 6506-2:2005 - Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines
ISO 6506-3:2005 - Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks
ISO 6506-4:2005 - Metallic materials - Brinell hardness test - Part 4: Table of hardness values
ISO 6507-1:2005 - Metallic materials - Vickers hardness test - Part 1: Test method
ISO 6507-2:2005 - Metallic materials - Vickers hardness test - Part 2: Verification and calibration of testing machines
ISO 6507-3:2005 - Metallic materials - Vickers hardness test - Part 3: Calibration of reference blocks
ISO 6507-4:2005 - Metallic materials - Vickers hardness test - Part 4: Tables of hardness values
ISO 6508-1:2005 - Metallic materials - Rockwell hardness test - Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T)
ISO 6508-2:2005 - Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines (scales A, B, C, D, E, F, G, H, K, N, T)
ISO 6508-3:2005 - Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (scales A, B, C, D, E, F, G, H, K, N, T)
ISO 6892:1998 - Metallic materials - Tensile testing at ambient temperature
ISO 6929:1987 - Steel products - Definitions and classification
ISO 7438:2005 - Metallic materials - Bend test
ISO 7539-2:1989 - Corrosion of metals and alloys - Stress corrosion testing - Part 2: Preparation and use of bent-beam specimens
ISO 8295:1995 - Plastics - Film and sheeting - Determination of coefficients of friction
ISO 8492:1998 - Metallic materials - Tube - Flattening test
ISO 9303:1989 - Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes - Full peripheral ultrasonic testing for the detection of longitudinal imperfections
ISO 9304:1989 - Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes - Eddy current testing for the detection of imperfections
ISO 9305:1989 - Seamless steel tubes for pressure purposes - Full peripheral ultrasonic testing for the detection of transverse imperfections
ISO 9402:1989 - Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes - Full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of longitudinal imperfections
ISO 9598:1989 - Seamless steel tubes for pressure purposes - Full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of transverse imperfections
ISO 9764:1989 - Electric resistance and induction welded steel tubes for pressure purposes - Ultrasonic testing of the weld seam for the detection of longitudinal imperfections
ISO 9765:1990 - Submerged arc-welded steel tubes for pressure purposes - Ultrasonic testing of the weld seam for the detection of longitudinal and/or transverse imperfections
ISO/TR 9769:1991 - Steel and iron - Review of available methods of analysis
ISO 10124:1994 - Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes - Ultrasonic testing for the detection of laminar imperfections
ISO 10474:1991 - Steel and steel products - Inspection documents
ISO 10543:1993 - Seamless and hot-stretch-reduced welded steel tubes for pressure purposes - Full peripheral ultrasonic thickness testing
ISO 11484:1994 - Steel tubes for pressure purposes - Qualification and certification of non-destructive testing (NDT) personnel
ISO 11496:1993 - Seamless and welded steel tubes for pressure purposes - Ultrasonic testing of tube ends for the detection of laminar imperfections
ISO 11699-1:1998 - Non-destructive testing -- Industrial radiographic films -- Part 1: Classification of film systems for industrial radiography
ISO 12094:1994 - Welded steel tubes for pressure purposes - Ultrasonic testing for the detection of laminar imperfections in strips/plates used in the manufacture of welded tubes
ISO 12095:1994 - Seamless and welded steel tubes for pressure purposes - Liquid penetrant testing
ISO 12096:1996 - Submerged arc-welded steel tubes for pressure purposes - Radiographic testing of the weld seam for the detection of imperfections
ISO 12135:2002 - Metallic materials - Unified method of test for the determination of quasistatic fracture toughness
ISO 13663:1995 - Welded steel tubes for pressure purposes - Ultrasonic testing of the area adjacent to the weld seam for the detection of laminar imperfections
ISO 13664:1997 - Seamless and welded steel tubes for pressure purposes - Magnetic particle inspection of the tube ends for the detection of laminar imperfections
ISO 13665:1997 - Seamless and welded steel tubes for pressure purposes - Magnetic particle inspection of the tube body for the detection of surface imperfections
ISO 13678/Cor1:2005 - Petroleum and natural gas industries - Evaluation and testing of thread compounds for use with casing, tubing and line pipe - Corrigendum
ISO 14284:1996 - Steel and iron - Sampling and preparation of samples for the determination of chemical composition
ISO 15156-2/Cor1:2005 - Corrigendum
ISO 19232-1/Cor1:2007 - Corrigendum
API Spec 5B - Specification for Threading, Gauging and Thread Inspection of Casing, Tubing, and Line Pipe Threads, Fifteenth Edition
ASTM A370-08a - Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM A435/A435M-90(2007) - Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates
ASTM A578/A578M-07 - Standard Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications
ASTM A751-07a - Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products
ASTM A941-06a - Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
ASTM A956-06 - Standard Test Method for Leeb Hardness Testing of Steel Products
ASTM A1038-05 - Standard Practice for Portable Hardness Testing by the Ultrasonic Contact Impedance Method
ASTM E8-04 - Standard Test Methods for Tension Testing of Metallic Materials
ASTM E18-08a - Standard Test Methods for Rockwell Hardness of Metallic Materials
ASTM E92-82(2003)e2 - Standard Test Method for Vickers Hardness of Metallic Materials (Withdrawn 2010)
ASTM E94-04 - Standard Guide for Radiographic Examination
ASTM E110-82(2002) - Standard Test Method for Indentation Hardness of Metallic Materials by Portable Hardness Testers
ASTM E114-95(2005) - Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Examination by the Contact Method
ASTM E165-02 - Standard Test Method for Liquid Penetrant Examination
ASTM E213-04 - Standard Practice for Ultrasonic Examination of Metal Pipe and Tubing
ASTM E273-01(2005) - Standard Practice for Ultrasonic Examination of the Weld Zone of Welded Pipe and Tubing
ASTM E309-95(2006) - Standard Practice for Eddy-Current Examination of Steel Tubular Products Using Magnetic Saturation
ASTM E570-97(2004)e1 - Standard Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products
ASTM E709-08 - Standard Guide for Magnetic Particle Testing
ASTM E747-04 - Standard Practice for Design, Manufacture and Material Grouping Classification of Wire Image Quality Indicators (IQI) Used for Radiology
ASTM E1290-07e1 - Standard Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement
ASTM E1806-96(2006) - Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition
ASTM E1815-06 - Standard Test Method for Classification of Film Systems for Industrial Radiography
ASTM G39-99(2005) - Standard Practice for Preparation and Use of Bent-Beam Stress-Corrosion Test Specimens
This product is related to: ISO 3183:2007 - Petroleum and natural gas industries - Steel pipe for pipeline transportation systems
ANSI/API RP 5LW - Specification for Line Pipe, Forty-fourth Edition, Includes Errata and Addendums 1 (2009), 2 (2010), and 3 (2011)
ANSI/NACE MR0175-2009 - Specification for Line Pipe, Forty-fourth Edition, Includes Errata and Addendums 1 (2009), 2 (2010), and 3 (2011)
This product referenced by:API STD 675 - Specification for Line Pipe, Forty-fourth Edition, Includes Errata and Addendums 1 (2009), 2 (2010), and 3 (2011)
API Std 650 - Specification for Line Pipe, Forty-fourth Edition, Includes Errata and Addendums 1 (2009), 2 (2010), and 3 (2011)
ANSI/ASME B31.1-2007 - Specification for Line Pipe, Forty-fourth Edition, Includes Errata and Addendums 1 (2009), 2 (2010), and 3 (2011)
ANSI/API Spec 12L - Specification for Line Pipe, Forty-fourth Edition, Includes Errata and Addendums 1 (2009), 2 (2010), and 3 (2011)
ANSI/API Spec 12B - Specification for Line Pipe, Forty-fourth Edition, Includes Errata and Addendums 1 (2009), 2 (2010), and 3 (2011)
CSA Z662-07 PACKAGE SMART - Specification for Line Pipe, Forty-fourth Edition, Includes Errata and Addendums 1 (2009), 2 (2010), and 3 (2011)
API Spec 12D - Specification for Line Pipe, Forty-fourth Edition, Includes Errata and Addendums 1 (2009), 2 (2010), and 3 (2011)
API Spec 12F - Specification for Line Pipe, Forty-fourth Edition, Includes Errata and Addendums 1 (2009), 2 (2010), and 3 (2011)
API Spec 12K - Specification for Line Pipe, Forty-fourth Edition, Includes Errata and Addendums 1 (2009), 2 (2010), and 3 (2011)
ANSI/ASME B31.9-2008 - Specification for Line Pipe, Forty-fourth Edition, Includes Errata and Addendums 1 (2009), 2 (2010), and 3 (2011)
ANSI/ASME B31.8-2007 - Specification for Line Pipe, Forty-fourth Edition, Includes Errata and Addendums 1 (2009), 2 (2010), and 3 (2011)
ASME BPVC-I-2007 - Specification for Line Pipe, Forty-fourth Edition, Includes Errata and Addendums 1 (2009), 2 (2010), and 3 (2011)
ANSI/ASME B31.3-2006 - Specification for Line Pipe, Forty-fourth Edition, Includes Errata and Addendums 1 (2009), 2 (2010), and 3 (2011)
API RP 5L1 - Specification for Line Pipe, Forty-fourth Edition, Includes Errata and Addendums 1 (2009), 2 (2010), and 3 (2011)
API RP 574 - Specification for Line Pipe, Forty-fourth Edition, Includes Errata and Addendums 1 (2009), 2 (2010), and 3 (2011)
API Spec 5LD - Specification for Line Pipe, Forty-fourth Edition, Includes Errata and Addendums 1 (2009), 2 (2010), and 3 (2011)
API RP 2T - Specification for Line Pipe, Forty-fourth Edition, Includes Errata and Addendums 1 (2009), 2 (2010), and 3 (2011)
ANSI/ASME B31.4-2009 - Specification for Line Pipe, Forty-fourth Edition, Includes Errata and Addendums 1 (2009), 2 (2010), and 3 (2011)
ANSI/ASME B31.9-2011 - Specification for Line Pipe, Forty-fourth Edition, Includes Errata and Addendums 1 (2009), 2 (2010), and 3 (2011)
ANSI/AWWA D100-11 - Specification for Line Pipe, Forty-fourth Edition, Includes Errata and Addendums 1 (2009), 2 (2010), and 3 (2011)
CSA Z662-11 PACKAGE - Specification for Line Pipe, Forty-fourth Edition, Includes Errata and Addendums 1 (2009), 2 (2010), and 3 (2011)
NACE MR0103-2010 - Specification for Line Pipe, Forty-fourth Edition, Includes Errata and Addendums 1 (2009), 2 (2010), and 3 (2011)
API Std 53 - Specification for Line Pipe, Forty-fourth Edition, Includes Errata and Addendums 1 (2009), 2 (2010), and 3 (2011)
This product replaces:API Spec 5L - Specification for Line Pipe, Includes Errata 1

Browse Product Family:

ANSI/API Spec 5L
API Spec 5L Addendum 3
API Spec 5L Addendum 2
ANSI/API Spec 5L Addendum 1
ANSI/API Spec 5L Errata 1
ANSI/API Spec 5L
API Spec 5L Errata
API Spec 5L
API Spec 5L
API Spec 5L-1995

People Who Bought This Also Bought:
API Std 1104 (R2010)- Welding of Pipelines and Related Facilities - 20th Edition, Includes Errata 1 (2007) and 2 (2008)API Spec 5CT- Specification 5CT/ISO 11960, Specification for Casing and Tubing, Eighth Edition, Petroleum and natural gas industries-Steel pipes for use as casing or tubing for wellsANSI/ASME B31.8-2007- Gas Transmission and Distribution Piping SystemsAPI Spec 6D- Specification for Pipeline Valves, Twenty-third Edition (Identical to ISO 14313:2007), Includes Errata 1, 2, 3, 4, 5, and 6 (2011) and Addenda 1, 2 (2011), 3 (2012)ANSI/ASME B31.4-2006- Pipeline Transportation Systems for Liquid Hydrocarbons and Other LiquidsAPI Spec Q1- Specification for Quality Programs for the Petroleum and Natural Gas Industry, Eighth Edition, Includes Addendum 1 (2010)API Std 620- Design and Construction of Large, Welded, Low-Pressure Storage Tanks, Eleventh Edition, Includes Addendum 1 (2009), Addendum 2 (2010), and Addendum 3 (2012)API Std 650- Welded Tanks for Oil Storage, 11th Edition, Includes Addendum 1 (2008), Addendum 2 (2009), Addendum 3 (2011), Errata (October 2011)ANSI/ASME B16.5-2009- Pipe Flanges and Flanged Fittings: NPS 1/2 through NPS 24 Metric/Inch StandardANSI/ASME B31.3-2008- Process Piping